How to Replacing the drive belt Honda Element
The procedure is fairly straight forward:
Need:
• Replacement belt P/N 38920-PZD-A01
• Serpentine Belt Removal Tool (with adjustable offset) and 14mm 6 sided socket
• 10 mm open end wrench
1. Turn front wheels hard right (or remove RF wheel) and remove the plastic access panel to exposed the main crank pulley
2. Using a 10mm wrench loosen (but don’t completely remove) the bolt holding the power steering
line clamp on the fender wall. Moving the clamp and steel tubing around
later on will help with a tight clearance when attaching the tensioner
tool to the pulley bolt.
3. Assemble the tensioner tool with an angle (using the extension) and
shallow (again, for clearance issues) 14mm six sided socket – see
picture below
No comments:
Post a Comment