Torque converter lockup

-->
I have a 1992 Chevy caviler and the problem is after a short drive at 50 mph when I come to
a stop it starts to jerk back and forth then the engine stalls. It will start again but! when I put it into drive it slams into drive and stalls again. If I wait about 15-mins it will work in drive fine.

Could this be the torque converter locking up?

You can unplug the electrical connections to the transaxle and see if it stays running.  If it does, there is a good bet the TCC solenoid is bad.

Would these  electrical connections be on the drivers or passenger side?

The electrical connector is on the transmission.

No comments:

Post a Comment